Harman Finned Igniter Removal & Replacement

Need help removing and replacing your Harman finned igniter?

Click HERE to view the illustrated steps for Finned Igniter Removal & Replacement.

Key Concept in this Procedure

• Make sure all the low-temperature (blue & yellow) wires are drawn to the back of the burn pot

• Only high-temperature insulation should be in the burn pot area

• Failure to do this shorts out the igniter, likely taking the control board with it

Tools Required:

• Small diagonal cutters

• 5/16 Nut driver

• 5/16 socket on ¼” drive ratchet + extension (PC45)

• Wire ties

Contact Us

Not finding what you're looking for? Contact Us Directly